EQUOTIP® 550 UCI
EQUOTIP® 550 UCI
Equotip enables portable hardness inspection of almost any object, polished parts and heat-treated surfaces. The hardness measurements are made by using the Ultrasonic Contact Impedance (UCI) method. The rugged Swiss-made metal NDT hardness testers are designed for portable hardness testing in the lab, in the workshop, at production facilities or on site.
Special Features
The leading Ultrasonic Contact Impedance measurement system with advanced capabilities
- Unmatched versatility owed to HV1, HV5, and HV10 test loads in a single probe
- Patented adjustable test load for higher accuracy on a wide range of applications
- Powerful measurement device on the market packed in a rugged chassis
Applications:
Ultrasonic Inspection of Welds / Ultrasonic Inspection of Cast and Forged Metals / Heat-treated surfaces
Technical Specifications | |
Software / Workspace App | |
| Display | 7” color rugged touchscreen unit (800 x 480 pixels) with dual core processor |
| PC Software | Equotip Link allowing direct reporting and custom reports |
| Memory | Internal 8 GB flash memory (> 1’000’000 measurements) |
Sensor Tech | |
| Native Scale | HV (UCI) |
| Available Scales | HB, HV, HRA, HRB, HRC, HR15N, HR15T, MPA |
| Available Probes | UCI (Adjustable load HV1, HV5 and HV10) |
| Combination With Other Methods | Leeb, Portable Rockwell |
| Average Roughness Ra (µm / µinch) | 12.5 / 500 |
| Minimum Mass (kg / lbs) | 0.3 / 0.66 |
| Minimum Thickness (mm / inch) | 5 / 0.2 |
| Instrument Firmware |
Automatic compensation for impact direction Personalized user profiles and views Integration in automated testing environments (incl. remote control) Measurement wizards Custom curve wizard Combined method wizard User guidance features Custom report features One-step calibration metric and imperial units support Profile view Heat Affected Zone (HAZ) line mapping |
| Pc Software | Equotip Link allowing direct reporting and custom reports |
| Display | 7” color rugged touchscreen unit (800 x 480 pixels) with dual core processor |
| Memory | Internal 8 GB flash memory (> 1’000’000 measurements) |
| Connections | USB host / device and Ethernet |
| Verification according to | ASTM A1038, DIN 50159, GB/T 34205-2017, custom method, combined method |
| Protection | IP54, fully rugged with shock-absorbing casing |
| Custom conversion curves | Yes, 1-point shift, 2-point, polynomial |
| Coefficient of variation | Significantly lower than the limits set in DIN 50159, ASTM A1038 & GB-T 34205-2017 |